2018 new Cisco CCNA Wireless 200-355 dumps pdf training resources and study guides download free try from lead4pass. “Implementing Cisco Wireless Network Fundamentals” is the name of Cisco CCNA Wireless https://www.leads4pass.com/200-355.html exam dumps which covers all the knowledge points of the real Cisco exam. It is the best choice for you to pass Cisco 200-355 exam.
Cisco CCNA Wireless 200-355 dumps exam preparation kit contains all the necessary 200-355 – Cisco questions that you need to know. You can download Cisco 200-355 dumps pdf training material from lead4pass and pass the Cisco 200-355 exam in the first attempt. Best study guide on how to pass Cisco 210-065 dumps exam tests. The best useful Cisco CCNA Wireless 200-355 dumps vce software free try.
【Download best free Cisco 200-355 dumps pdf】: https://drive.google.com/open?id=0B_7qiYkH83VRM01sZjQ2dUtRckU
【Download best free Cisco 200-310 dumps pdf】: https://drive.google.com/open?id=0B_7qiYkH83VROXBqSzZWaThrVlE
Vendor: Cisco
Certifications: CCNA Wireless
Exam Name: Implementing Cisco Wireless Network Fundamentals
Exam Code: 200-355
Total Questions: 504 Q&As
Useful Cisco CCNA Wireless 200-355 Dumps Exam Questions And Answers (1-30)
QUESTION 1
What is max power for an AP for all regulatory bodies?
A. 10
B. 8
C. 1
D. X
Correct Answer: B
QUESTION 2
How Cisco spectrum analyzer analyse the scanned data?
A. Store scanned data during wifi scan and analyze later.
Correct Answer: A
QUESTION 3
What is the deployment that requires least amount of hardware installed on the site?
A. Cloud
B. Converged
C. Centralized
Correct Answer: A
QUESTION 4
What command can be used on the WLC to show the logs (or something) for an AP with the name Cisco_AP?
A. show logging
B. show ap eventlog Cisco_AP
Correct Answer: B
QUESTION 5
What is the command used to debug an AP that is not able to join the WLC?
A. debug capwap events enable (on the WLC)
B. debug capwap events enable (on the AP)
Correct Answer: A
QUESTION 6
What are the channels you need to avoid not to have interference with DFS channels? (Choose 3)
A. 52
B. 136
C. 124
D. 161
Correct Answer: BCD
QUESTION 7
What is required from the deployment when using voice or video applications? (Choose 3)
A. RSSI cell edge of -25
B. RSSI cell edge of -16
C. SNR of 25
D. Cell Overlap of 20%
E. RSSI -67
Correct Answer: CDE
QUESTION 8
What are the sources of interference you will find when conducting a site survery before deployment? 200-355 dumps (Choose 3)
A. Bluetooth Headset
B. Microwave Ovens
C. Analog Wireless Camera
D. AdHoc Wireless Camera
E. AdHoc Hotspot
Correct Answer: ABC
QUESTION 9
What are reqs for VoWLAN?
A. RSSI -67
B. SNR 25
C. 20% overlapping cells
Correct Answer: C
QUESTION 10
What is SNR needed for 54 Mbps?
A. SNR 25
Correct Answer: A
QUESTION 11
What is max level in Cisco WLC TPC for all regulatory domain?
A. 1
B. 8
Correct Answer: A
QUESTION 12
Engineer needs an LAP to support few WLANs with different DHCP servers for different SSIDs, how to fulfill this requirement?
A. configuring dynamic VLAN interfacesto SSIDs in AP group.
B. configure DHCP in AP settings advanced page
Correct Answer: A
QUESTION 13
Which wireless survey you do considering the “infrastructure” in the building?
A. Passive
B. Active
C. Planning
Correct Answer: C
QUESTION 14
What are the minimum requirements to operate cisco 7925 wireless phone? (Choose 3)
A. RSSI -67
B. SNR 25
C. 20% cell overlapping
Correct Answer: ABC
QUESTION 15
Which WLC menu you use the check the assigned power level of an AP?
A. Wireless
B. Management
C. Controller
D. Monitor.
Correct Answer: A
QUESTION 16
How much wireless cell overlapping is required for 5GHz voice and data roaming?
A. 5%
B. 10%
C. 15%
D. 20%
Correct Answer: D
QUESTION 17
Which CLI command you use in WLC to update the running IOS?
A. TFTP
Correct Answer: A
QUESTION 18
What is the maximum power level for AP in any regularity domain?
A. 1
B. 5
C. 8
D. 10
Correct Answer: A
QUESTION 19
How much SNR needed to reach 54Mbps in 802.11g network?
A. 25
B. 10
Correct Answer: A
QUESTION 20
What three authentication methods are generally used in enterprise wireless networks? (Choose three.)
A. AES
B. CCKM
C. EAP-FAST
D. EAP-TLS
E. PEAP
F. WEP
Correct Answer: CDE
QUESTION 21
Which CLI command shows the controller configuration in a way that is similar to the way that it is displayed on Cisco IOS routers?
A. show config
B. show run config
C. show run-config
D. show running config
E. show running-config
Correct Answer: E
QUESTION 22
Which four parameters need to be configured for local EAP-FAST on the controller? (Choose four.)
A. Authority ID
B. Authority ID Information
C. Client Key
D. PAC
E. Server Key
F. TTL for PAC
G. Monitor Key
H. NTP Source
Correct Answer: ABEF
QUESTION 23
Which CLI command would you use on the Cisco WLC to display detailed information for a client associated with a lightweight access point?
A. debug dot11
B. show arp switch
C. show client detailed
D. show exclusionlist
Correct Answer: C
QUESTION 24
Which statement applies to TKIP?
A. is part of the initial key exchange used to derive a pairwise temporal key
B. is used to encrypt a WEP authenticated session
C. is used to encrypt the data for WPA sessions
D. is used to secure the initial authentication credential exchange between client and authenticator
Correct Answer: C
QUESTION 25
What does the current European Telecommunications Standards Institute rule state is the 2.4-GHz maximum transmitter output power for point-to-point installations? 200-355 dumps
A. 16 dBm
B. 17 dBm
C. 20 dBm
D. 30 dBm
Correct Answer: B
QUESTION 26
How do the features that are available on the Cisco WCS for Linux version differ from those of the Cisco WCS for Windows version?
A. Assuming that there are no differences in hardware, a Cisco WCS for Linux can support up to 750 wireless LAN controllers. A Cisco WCS for Windows can support up to 250 wireless LAN controllers.
B. Cisco WCS for Windows includes support for Cisco Spectrum Expert clients. Cisco WCS for Linux does not support Cisco Spectrum Expert clients.
C. Cisco WCS for Linux is required for deployments.
D. There are no differences in features between the Linux and Windows versions of Cisco WCS.
Correct Answer: D
QUESTION 27
Which modulation technique allows you to achieve a data rate of 54Mb/s in the 2.4GHz-band?
A. Complimentary Code Keying
B. Differential Binary Phase Shift Keying
C. Differential Quadrature Phase Shift Keying
D. Quadrature Amplitude Modulation
Correct Answer: D
QUESTION 28
What is the result when client exclusion is enabled with a timeout value of zero?
A. Clients are excluded indefinitely.
B. Clients are never excluded.
C. Client exclusion is disabled.
D. Clients must be explicitly included by specifying the MAC address.
E. Exclusion and inclusion is determined by access list.
Correct Answer: A
QUESTION 29
An indoor 1240 AP is booting and has obtained an IP address using DHCP. The AP has confirmed prior controller IP addresses from a previously joined mobility group stored in NVRAM.
What is the next step the AP performs?
A. DHCP option 43.
B. DNS resolution of CISCO-LWAPP-CONTROLLER.localdomain.
C. Layer 2 LWAPP discovery broadcast.
D. Layer 3 LWAPP discovery broadcast.
E. Ping each Cisco WLC to verify its current status.
F. Select a Cisco WLC based on its position in the configured join selection sequence.
Correct Answer: A
QUESTION 30
Which AP to Wireless LAN Controller discovery process requires a previous association of the AP with a Cisco WLC?
A. AP priming
B. defining a master controller
C. DHCP Option 6
D. DHCP Option 43
Correct Answer: A
Latest Cisco CCNA Wireless 200-355 dumps exam practice files in PDF format free download from lead4pass. The best and most updated latest Cisco CCNA Wireless https://www.leads4pass.com/200-355.html dumps pdf training resources which are the best for clearing 200-355 exam test, and to get certified by Cisco CCNA Wireless. 100% success and guarantee to pass Cisco 200-355 exam.
High quality Cisco CCNA Wireless 200-355 dumps vce youtube: https://youtu.be/Ndxv1YxGhWc